PDA

View Full Version : Dynamite Plus programmer



sticker
06-03-2007, 05:04 PM
hey people how to make mosc card by using Dynamite Plus programmer and i am using software CAS Interface Studio 7.9c. help me plz.

i am gettin like this
Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful

Parva
08-03-2007, 11:16 PM
Assuming you are using a MOSC and NOT a Funcard the Dynamite programmer has to be connected to the PC via USB AND serial. It will not work if it's not connected to the serial port (whereas Funcards do not need the serial port).

Edit: Ah wait, are you sure this card wasn't fried? That's the sort of response you'll get from a card that was in the stream when the ecm's were sent to kill em. :(

sticker
13-03-2007, 01:15 PM
i connected the com1 and installled this CAS Interface Studio 7.9 and set up phoxia 3.65 but still i not getting anything. what is the proble on my setting any1 know

i using mosc card the smart n*l card. i got 2 mosc card but both of them geting same thing
Opening of COM1 was successful
Reset failed
Error reseting card, ATR string invalid
Closing of COM1 was successful

cryptic x
14-03-2007, 12:40 PM
no atr string defo fried cards

sticker
15-03-2007, 12:36 AM
what should i do with that. is there anywhere

jay_88
15-03-2007, 05:58 PM
i thing your card is bloked u need to unlock card forst then try :seasaw:

glesgajohn
15-03-2007, 06:21 PM
a mosc card that returns no ATR is fried m8 looks like they took hit and r usless try another mosc card if it reads ok then cards are knackered , u cant fix NO ATR

shaan
30-05-2007, 09:20 PM
hello everyone.How many different types of cards can be programmed with dynamite

m1nz
28-06-2007, 01:39 PM
Where can you download the dynamite software

jr_419
07-07-2007, 10:55 PM
site for duolabs Duolabs - Home page (http://www.duolabs.com)

bamisto2
09-07-2007, 07:38 PM
what should i do with that. is there anywhere

or try the ATR repair software instead maybe you will get a luck. cheers!( can get it in the dowload section m8)