PDA

View Full Version : what setup do you use



jeff1978
16-02-2007, 05:01 PM
by this i mean what sat setup do people use e.g stb, cams, dish ,motors, cards.

i use a tm 1500ci super, a dragon cam,x-cam, magic converted to matrix, funkie dish diseq 1.2 motor titanium 1 card and a few funcards all progremmed in a infinity usb phoenix progremmer getting all sats from about 40 east to 40 west

regards jeff1978

krazylegz
16-02-2007, 08:24 PM
used to have TM1500CI+Super but sold it to my bro and got a DM500s (all networked) instead. Diseqc1.2 motor,90cm technomate dish,0.2 titanium lnb 12month art card sub aswell as my sly+ full package sytem

relifex
16-02-2007, 08:37 PM
Iv'e just recieved my dreambox 7020, in the middle of setting it up on my old 80cm dish pointing at hotbird, once I get to grips with this i'll stick a motor on it!

R.

krazylegz
16-02-2007, 09:03 PM
Iv'e just recieved my dreambox 7020, in the middle of setting it up on my old 80cm dish pointing at hotbird, once I get to grips with this i'll stick a motor on it!

R.


if u put on gemeni 3.40 there is a autoupdater available for tps and multi m8:)

relifex
17-02-2007, 04:10 PM
if u put on gemeni 3.40 there is a autoupdater available for tps and multi m8:)

I don't suppose you could point me in a good direction could you?
Cheers
R.

krazylegz
18-02-2007, 07:19 PM
you need to have your box networked m8 and constantly connected to the internet m8. then once 3.40 is installed and all network settings correct use the blue button to download mg_camd as it has D+ and tps au on it.

just google gemini3.40 for the image m8;)

jeff1978
21-02-2007, 07:28 PM
anybody else want to tell us what sat stuff they use cams, cards dishs, motors, stb's, lnb's
thanks jeff1978

yunus
24-02-2007, 12:21 PM
got a dm7000s on a 90cm motorised dish twin lnb so i can have another line in the backroom. box is all networked up so auto update tps/multi and download latest keys for tequilla ant premiere

relifex
24-02-2007, 08:07 PM
you need to have your box networked m8 and constantly connected to the internet m8. then once 3.40 is installed and all network settings correct use the blue button to download mg_camd as it has D+ and tps au on it.

just google gemini3.40 for the image m8;)

Cheers m8
R.

digidude
24-02-2007, 11:13 PM
i have a dreambox 500s (fully networked and connected to its watchable through xbox) and a tm 1500 in another room both running off a motorised 1.1M dish with .3Db GI twin LNB then have an @sat reciever and a tm1000D running of a motorised 90cm dish. also have a zone2 sky dish with quad lnb wired to 2 rooms

and still cant get freeview

kellys
26-02-2007, 03:17 PM
Technomate 5000 DAPCI
80cm motorised dish
Dragon cam + firecrypt
AXAS II cam, converted to MR
Matrix Reloaded cam
Aston cam 1.5
Viaccess cam
Infinity USB Phoenix
Titanium, Blue & White
Fun cards 4&6
Cas interface 1+

can't get into downloads

KoFi G
27-02-2007, 12:03 AM
echostar ad3000ipva
echostar dsb 809 (cheap but for disq.)
dragon trex
joker
magic
matrix
4.6se was brill cam in its day
various cards proggers
etc
1m dish

agsol
27-02-2007, 08:47 AM
Hi everyone, I have

Inovative IP receiver
Technomate TM5500 CIS patched to Next
Digiquest P2000 with ALL Beaf patch
Hirschman 85cm dish
MTI .3 db LNB
Stab 100 motor
Dragon, Matrix, Magic cams and various cards and programmers
Sky and Sky+

Regards

bassy777
28-02-2007, 03:04 AM
technomate 1500
art sport 12 mths card
humax 5300
nokia 9600
matrix cam
freecam 2.018
1.2 metre irte dish
skystar 2 pci card.

thats my lot and i must say i have gotten my value from the above items.

jeff1978
02-03-2007, 03:53 PM
anyone else who would like to tell us what they use stbs,cams,cards,dishes,lnbs,motors etc.
thanks jeff1978

briles
03-03-2007, 03:47 PM
Mine's a Technomate 1500 CI Super, moving dish I think 80cm, have got a dragon which doesn't see much use, I have a VR3 card and a MII card which I believe to be useless theses days. I'm lucky that I have a media center PC sat below the telly, which is constantly linked to Tecnomate.

I programme my stuff with a CAS 3, and this comes in handy for the Cable stuff too. That's where the media ctr comes into it's own cos I have 2 boxes, one for tv viewing, the other linked to media ctr for recording/playback.