PDA

View Full Version : For ExC&W - Choose N*L or C&W?



stevedurban
01-02-2007, 11:52 PM
Hi Guys

If im in an ex C&W area, should i choose C&W or N*L for a funcard?

Thanks

thesparky
02-02-2007, 12:04 AM
exC*W m8 what your area?

stevedurban
02-02-2007, 12:06 AM
Manchester?

thesparky
02-02-2007, 12:12 AM
Manchester 1 NTL 41040 666.750
Manchester 2 NTL ex C&W 41060 666.750

if you have a subbed box go to interactive/setting/diagnostics top line is netid so if its 41040 use N*L and if its 41060 use EXC*W
v3 is the flash to use at the moment
http://world-of-digital.com/forums/f73/12461-v3-tested-all.html

stevedurban
02-02-2007, 12:18 AM
fantastic! thanks m8!

Please can you just clarify that im doing it right though.. bit of a newbie!

open TOXIXC7_EXTEEGEN, put ird and bk (ird starting in 12)
save the file
run swapbinhex with that file to create a bin file
upload that bin file into EXT
Put the N*L file into Flash
DONE?! Am i missing something?

Thanks for you help!

thesparky
02-02-2007, 12:21 AM
fantastic! thanks m8!
Please can you just clarify that im doing it right though.. bit of a newbie!
open TOXIXC7_EXTEEGEN, put ird and bk (ird starting in 12)
save the file
run swapbinhex with that file to create a bin file
upload that bin file into EXT
Put the N*L file into Flash
DONE?! Am i missing something?
Thanks for you help!

thats it m8 it just you swap the .bin to a .hex file but with a dynamite you just leave it as a .bin file
once the card is written power off box insert card power on box wait for at least 10 minutes then enjoy:thumbup2:

stevedurban
02-02-2007, 12:23 AM
im in 41060 by the way!

thesparky
02-02-2007, 12:27 AM
im in 41060 by the way!
then your 100% EXC*W so use "CryptHexCW-v3.hex" in the flash

stevedurban
02-02-2007, 12:35 AM
i must be doing something wrong... as soon as i put the card in now, the engineers menu shows card status: "Mute Err"

Any ideas?

stevedurban
02-02-2007, 12:36 AM
im using an ATMega163 by the way, not sure if that effects it!

thesparky
02-02-2007, 12:38 AM
its a different flash for atmega cards m8
http://world-of-digital.com/forums/attachments/63/2272-atmega-files-atmega.zip
use 16/08/06

stevedurban
02-02-2007, 12:40 AM
haha, that would explain it then! no wonder ive been chasing my tail all night...

dont suppose you know where i can find it do you?

thanks for all your help!

thesparky
02-02-2007, 12:43 AM
i posted a link above m8

stevedurban
02-02-2007, 12:50 AM
RESULT!!!! Thank you so much m8!!! were all working again!

stevedurban
02-02-2007, 12:52 AM
lol.... one LAST thing.. im guessing its just by design, but the ppv films are not working... im sure they did before....?! Just one of those things?!

thesparky
02-02-2007, 01:08 AM
Have you gone VOD (video on demand) /flim flex if so then ppv has stopped for you
That hex is for an ATMega card and should give both AU & PPV functionality