PDA

View Full Version : Jtag



machende
28-01-2007, 10:18 PM
Hi all,
I`m hoping to get some help. I`ve jtagged my samsung box ok, but the problem Im having now is if I use box key extractor it throws up Zero`s for BK. In the OCD commander I dont know what BYTE I type to get the BK and ird. Im in a ex C&W, in west yorkshire.
Please help, what byte do i type in the OCD Commander

thesparky
28-01-2007, 10:27 PM
try
byte 0x20040000 8

machende
28-01-2007, 10:38 PM
Will Try It, Thanx

jakebt123
29-01-2007, 03:12 AM
Hi all,
I`m hoping to get some help. I`ve jtagged my samsung box ok, but the problem Im having now is if I use box key extractor it throws up Zero`s for BK. In the OCD commander I dont know what BYTE I type to get the BK and ird. Im in a ex C&W, in west yorkshire.
Please help, what byte do i type in the OCD Commander

use samsung debug tool it throws up all zeros as well but if you enter the offset byte in the long box at the bottom it will throw the right bk up plus about 6 zeros at the end ignore the zeros , or in the small box next to it take out the 12 bytes and enter 8 click read this will give bk with no zeros , problem seems to be that the programs are requesting 16 bytes and the bk window at the top will always display the last 8 bytes in the request which happens to be zeros
heres the byte offset to enter in the long read box if your nthell
0x00f6a8a8 the top box will give you the right ird , sammy debug tool is in download, hope this helps mate

machende
12-02-2007, 10:01 PM
I`ve tried both but no joy. I stuck

glesgajohn
15-03-2007, 08:28 PM
try using bk2.2 m8 edit config with latest bytes ,..hope this helps

Donnie Darko
18-03-2007, 05:00 PM
Make sure the box is on the latest software platform for your area.
Short battery and let it take your area software rev,if ex-cw your gonna have to set net id first before applying cable feed.