PDA

View Full Version : ex cw au fun problems



steve07951
26-01-2007, 01:53 PM
my ex cw au funcard 4 stopped working today @ 12oclock well i think its the card still get ch 1 to 5 has anyones card gone off in the Burnley area cheers for any help with this

preetstud69
26-01-2007, 02:02 PM
Hi mate, i think all the fun cards have stopped working, but people with atmega's are still on, i suspect that there will be a fix for funcards very soon.
regards

adam
26-01-2007, 02:17 PM
Funcard 4 ex c&W also gone off today at 12.00

steve07951
26-01-2007, 02:21 PM
Funcard 4 ex c&W also gone off today at 12.00
THANKS FOR PROMPT REPLAY

master
26-01-2007, 02:40 PM
yep, your right fun cards in ntl also down.

saber_uk
26-01-2007, 02:53 PM
Funcard tw also gone off today at 12.00

fergalsworld
26-01-2007, 02:59 PM
Try using flash v3 and leave it for 10 mins.

steve07951
26-01-2007, 04:31 PM
Try using flash v3 and leave it for 10 mins.
HAS ANYONE GOT EX CW V3 WORKING

neilf
26-01-2007, 04:47 PM
Mine Gone Down Around 12pm Today Hope Fix Will Be Soon Anyway How Do Make A Fix Any Know

darengo
26-01-2007, 04:48 PM
funcard gone only few chns working in london

profpeeweeplop
26-01-2007, 05:12 PM
hi people anyone know where i can fin the v3 flash please . been told this will sort it out . thanks

DRE
26-01-2007, 05:54 PM
exc&w back on keys are there!!.

machende
26-01-2007, 06:51 PM
Im not sure whats going on, but mine is working ok, ex c & w in West yorkshire. So is my mate`s just a few miles from me

uk_chris2000
26-01-2007, 07:54 PM
yes mine a gone down m8 as well and im in burnley

i hope new flash comes out soon


regards................................ chris

steve07951
26-01-2007, 07:54 PM
ex cw crytphex v3 works its v2 thats down

uk_chris2000
26-01-2007, 08:11 PM
ex cw crytphex v3 works its v2 thats down steven im also in burnley where did you get the v3 iv looked every where




cherrs ..................chris

Jango
26-01-2007, 09:24 PM
Try using flash v3 and leave it for 10 mins.

Hiya All,

Made a fair few of these fun cards lately for mates in the ex c&w area, but tried 3 times now on my card with the v3 file and it just don't come on. Still got the same as you lot from v2 file chans 1-5 but when I get to living, it just don't tune in. I've left it for more than 15 mins and it still hasn't got it. Anybody give me any clues please for the ex C&W ?? ta

lats
26-01-2007, 09:29 PM
Funn Card Ex C&w gone off in Barking too.:(

telboy
26-01-2007, 09:41 PM
did you just re-write the v3 flash mate i didnt bother re-doing the bin for ext . this worked for me ok

ace12345
26-01-2007, 09:41 PM
OK

for a pace box you need to put in the ird in toxic with it starting with 12

for a samy you need to create a bin file from n edit and have the ird with the 3e at the end

now load the rest of the files and program

leave for 10min on 101 then change and it working

note: no need to put any pub keys in

lats
26-01-2007, 10:17 PM
HAS ANYONE GOT EX CW V3 WORKING


Hi have 2 Boxs at home in one box i am useing a funcard and the other i use atmega

I have programed my funcard with with the V3 and when i use it on one box it starts to work perfectly after 10 mints this is the box with atmega card I then use this card on another box and it wont work only the B*C channels are available

Confused :(

Lats

Jango
26-01-2007, 10:21 PM
did you just re-write the v3 flash mate i didnt bother re-doing the bin for ext . this worked for me ok

I had the external & flash already in a folder, so used the v3 file and wrote each one inturn to the card. Like I say, comes up the same as it was showing with the v2 version on the card. I've just recreated my external again as another go and still the same results. I'll leave on 101 for a while an see if it gets it - I doubt it though - missing something simple here.

telboy
26-01-2007, 10:28 PM
if youve re progged the ext as well did you do the flash last !! , do ext then flash as the flash can get wiped when doing ext

lats
26-01-2007, 10:29 PM
MY problem is sorted the fun works on both left it on 101 for a while then tried other channels and it worked.

thanks

Jango
26-01-2007, 10:29 PM
if youve re progged the ext as well did you do the flash last !! , do ext then flash as the flash can get wiped when doing ext

Yep, did my flash last..cheers bud !

lats
26-01-2007, 10:38 PM
Hi i Used Nagra to edit the EXT file perhaps thats what did it

Lats

Jango
26-01-2007, 10:42 PM
did u take your v3 file from the fun card downloads - an old post ?

telboy
26-01-2007, 10:54 PM
the ones i used are dated 14 /8/ 2006 think the ones on here are 16-8-06 v3

Jango
26-01-2007, 11:01 PM
Yep, I'm using the ones, I've had these for sometime now from using the v2, going give my box a bit longer then give up for tonight. Duno if a few reboots will do any good...thanks for your help mate.

Jango
27-01-2007, 10:46 AM
Repeat after me, I'm stupid and I wasn't writing the files to the right place - doh !!!! all working, as it should have been 24 hours ago.

telboy
27-01-2007, 11:52 AM
lol good to see you got sorted mate . ive been there and got the T-shirt

darengo
27-01-2007, 05:12 PM
all chns working with crypthex-v3 thanks

jontydog
27-01-2007, 09:08 PM
hmm mine is the same as Jangos was. How can you write the files to the wrong place? All I get is a black screen on v2 and v3. Been left in for an hour and nothing. Would it be easier to erase the card and start from scratch?

jontydog
27-01-2007, 10:13 PM
Sorted it out :D Erased the card and reprogrammed it with V3 :)

Merlin
27-01-2007, 11:04 PM
@Jontydog

I think sometimes if the card doesn't take the keys correctly, they get corrupted on the card so it won't take the update when you upgrade it to Crypthex v3.... just erase and reprogram as you have done and it's sorted. I bet people wish MOSCs were as simple....

M

kwon
28-01-2007, 08:11 PM
Any news on the fix????

fergalsworld
28-01-2007, 08:32 PM
Any news on the fix????
Have you even bothered to read this thread from the beginning?
It explains how to fix it:gun: