View Full Version : 2 4200e's that wont lock on
ozzy2005
19-01-2007, 02:03 PM
I have 2 surfboard 4200e modems here that i cant get to lock(just 2 flashing lights) any other 4200e that i had that was doing the same i flashed with SB4200E-Final-Sigma1.4_lite.bin any they worked ok but not these......im not sure what firmware was used if any was before i got them.....any ideas?
Cableguy69
19-01-2007, 11:40 PM
Have you changed your downstream frequency to your area.
TW: 331000000
NTL: 402750000
EXCW: 586750000
ozzy2005
20-01-2007, 04:16 PM
Yes mate done that and put in a working mac and a valid config....any other ideas?
bladesftp
20-01-2007, 05:33 PM
have you checked that the cbale feed is n correclty and are your sure the macs you have are not from your area
ozzy2005
20-01-2007, 06:12 PM
Yes mate the cable feed is in right 100% and the macs are deff working and not from my area(tryed them on my own 4200e).....
Cableguy69
20-01-2007, 09:41 PM
All I can suggest is to try recovering them with Max or Blackcat to original firm then start over again.
koevoet
20-01-2007, 11:48 PM
If you are not in an exC&W area you have to check that hybrid mode is enabled on the modem otherwise they will not lock .
Regards
ozzy2005
21-01-2007, 04:10 PM
As always mate cheers for the reply.....im in a pure ntl area how do i check if hybrid is enabled?
koevoet
21-01-2007, 06:27 PM
The reason why people are having trouble with the conversion is beause some modems have hybrid mode disabled here is what you need to do:
Open OneStepZup (To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts. SNMP util, then put at OID
1.3.6.1.4.1.1166.1.19.3.1.20.
( be careful, the last DOT is important to be there !! )
Then if you make a "get" you will receive a "2" ( Hybrid Mode DISABLED )
If you can't receive anything, reboot the modem, and hit "get" several times until it's gotten.
You must then, put a 1 and "set". --> 1 means Hybrid Mode ENABLED.
( the same, if you get somo java.socket error, then reboot the modem and begin again hitting "set" ...until is done.
Then reboot again...and your SB4200E will work like a SB4200 !! (docsis + eurodocsis )
Regards
ozzy2005
21-01-2007, 08:45 PM
Jesus mate as always with your info it worked a treat,i think the cc's should pay you off as it would cost them less in the long run.......cheers once again.
Cableguy69
22-01-2007, 10:54 PM
Always listen to Koevoet.
This man is seriously on the ball, I taught him everything he knew, now he knows more than me lol, even took my mod job for a while lol, no seriously he learnt it all by himself, but this guy rocks.....
koevoet
26-01-2007, 05:47 PM
LOL , thx cableguy69 , seems me and you are back in the scene again at long last, good to be working with you again.
Regards
vBulletin v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.