PDA

View Full Version : help please modem 4100 motrola



youngie
04-01-2007, 06:04 PM
hello everyone i have just brought a new motrola surfborad 4100 with software on it but it seem to crash my pc all the time i can stay on for abot 20 mins at that is it i have to reboot my hole pc what i am doing is going to 198.168.100.1 and going to the hack bit entering the file name cmreg-ntxxx120-dxx.xx and and hitting change config file then entering tftp number xx.xxx.xx.xx and then the hfc mac address 0002xx6xxCx2 then hitting change id and then unpluging it from the back to reset all goes well for 20 mins then nothing back to turning of pc what am i doing wrong please do help if you can and the software i am runing is Software Version: SB4100-0.4.4.5-SCM01-NOSH-2.03
Hardware Version: 1
MIB Version: II
GUI Version: 1.0
VxWorks Version: 5.3
very kind regards youngie oh and do i need to install any drivers as i keep seeing that if so how and where will i download them from thanks again

youngie
05-01-2007, 06:05 PM
come on please any help i would love to hear from you all lol not really still stuck 4 days later helppppppppppp kind regards youngie

jr_419
11-01-2007, 12:16 PM
hello youngie jr_419 dont know a great deal about motorola but i think your using wrong config file for the motorola what area are you excw let me know illl try and help you jr_419

Cableguy69
19-01-2007, 11:49 PM
TBH m8 theirs no reason the modem should crash your PC if your using the wrong firmware or config the modem would'nt work simple as that. Are you connecting through USB or Ethernet if it's through ethernet I've got no idea if it's through USB the drivers may be clashing with something else on your PC.

tony508
20-01-2007, 12:34 AM
seen this before mate...
The RJ45 Conection go`s faulty after 20 -50 mins...
Only way i found round the problem was to set up modem with
RJ45 Cable ..When on line ..Disconect RJ45 Conect USB cable
and REBOOT Modem.....