PDA

View Full Version : programming ambit mx chip with willem



sattop
02-01-2007, 08:44 PM
hello everyone im trying to programe a mx abtc chip with my willem the trouble im having is it keeps programing but not verifing.......im not sure if im using the right dump..if any9one knows of the dump ineed and where io can find it pls send me in the right direction

sattop
02-01-2007, 11:07 PM
did u use these files with your willem or hyperterminal and tftp

jr_419
02-01-2007, 11:19 PM
i used hyperterminal and tftp mate using max233 but dont see why you cant use willems but probably just load the dump

sattop
02-01-2007, 11:26 PM
this is what im getting in hyperterminal

==========
d) Download and save to flash
g) Download and run from RAM
c) Store icePROM bootloader to flash
b) Boot from flash
e) Erase flash sector
m) Set mode
s) Store bootloader parameters to flash
i) Re-init ethernet
r) Read memory
w) Write memory

TFTP Get Selected

Board TFTP Server IP Address [192.168.100.10]:
Enter TFTP filename [sigmax2_125_cracked_dump]:


Free store: a0300000
Starting TFTP of sigmax2_125_cracked_dump from 192.168.100.10
Getting sigmax2_125_cracked_dump using octet mode
Received Error Code 1: File not found
Aborting TFTP session...
Store parameters to flash ? [n]

jr_419
02-01-2007, 11:30 PM
ok sattop ive added you to messenger looks like you need to reload the boot loader and start again i did mine with max233 using the 200 docs in the file i sent you if boot loader gone look at bottom of doc on the 200 docs it will tell you how to re load it