PDA

View Full Version : UHF output on DBOX2



boyfriday
07-06-2006, 11:32 AM
Hi perhaps a daft question but does the UHF tv output at back of Dbox2, male connection which connects to a coaxil cable, produce a picture that can be tuned into by a UK model television? Or is the system too different in Germany?

Cheers
Craig

Devilfish
07-06-2006, 12:03 PM
This is just a passthrough from the antenne in connection. You won't be able to get any channels from this. The only way to get channels out of a dbox is through the scarts.

You might be able to use this connection to feed the antenne on another dbox (if you know what I mean).

scruff1963
07-06-2006, 01:27 PM
If you plug it into a TV you should get 10 channels including SKY1
Just tune the TV as if it was an antenna, handy for a 2nd Tv
You will not get all the dbox channels.

Devilfish
07-06-2006, 01:29 PM
If you plug it into a TV you should get 10 channels including SKY1
Just tune the TV as if it was an antenna, handy for a 2nd Tv
You will not get all the dbox channels.

This depends on your TV. Some tv's will do this, others won't. Depends on the tuner that the tv has.