PDA

View Full Version : R11 B09 AU FIX 21.11.06 not opening in XNCS



Sempre O Mesmo
05-12-2006, 11:18 PM
Hi guys

As anyone experienced the same prob? i used this image on card and i am having trouble in opening it with XNCS it say check dts len

Found the Delay for 1000 @ Time:159000
Found the Delay for 100 @ Time:160100
Found the Delay for 10 @ Time:160310
4) Now Working - Dont Interrupt!

and then it shows up check dts len

card is still locked

any cmd to send with caton?

cheers
sempre o mesmo

djdoddy00
06-12-2006, 01:46 AM
Use Mrom mate, with timings 180,80,80 and hit reparar thats the only way to open these cards. Xncs doesnt work. You will lose all the info off the card but its the only way.

roll
26-12-2006, 12:27 PM
I have the same problem with XNCS when using Windows XP, but i have a laptop with windows ME and when i connect my programmer to this they open straightaway. It is something to do with XNCS not liking windows XP

yorobbo
19-02-2007, 05:40 PM
i also use mrom delays set at 130 0 130, works a treat every time