-
Zgemma star H1 info and flash box here
This post requires you to click the Thanks button to read this content.
Last edited by ilovenzb; 24-01-2015 at 01:10 PM.
-
Post Thanks - 15 Thanks, 2 Likes
fergalsworld,
thelostone,
tame,
cactikid,
aays01543,
mgzr1400,
bezo,
shaft56,
teracir,
bootdisc_20,
bob14,
vini,
oddstruck,
digitalman,
richyx thanked for this post
-
glad it says unofficial vix as many think vix support it.
-
Post Thanks - 0 Thanks, 1 Likes
-
Member
- Rep Power
- 0
struggling
Hi,
I am really struggling with the cable vm part of this box and cannot find any help guides on it at all.
I have a h2 and its running sweet but cannot get a cable signal on the H1 at all.
Any tips?
cheers
-
Hidden Content Originally Posted by
mgzr1400
Hidden Content
Hi,
I am really struggling with the cable vm part of this box and cannot find any help guides on it at all.
I have a h2 and its running sweet but cannot get a cable signal on the H1 at all.
Any tips?
cheers
i will b the same setup i think
s2 you got ?
h2 ther not out yet??? :S
try this
goto menu service searching - tuner config and check tuner b is enabled if it says not connected press ok on it then press right to enable and green to save
Then press exit until back to main page
Then press menu 4 2 2 and goto providers (takes a min to load) change your vm provider to your area and press green to save
Then goto start scan and let it scan
When finished press exit until at main page then hold down power button on remote and select restart. Once rebooted your done
let me know how you get on
-
Member
- Rep Power
- 0
opps
Sorry I meant h2.
The H1 is giving me problems but I will try what you said and hopefully sort it.
I have got the old vm box down to check the incoming cable tomorrow and go from there.
cheers for the help
-
Hidden Content Originally Posted by
mgzr1400
Hidden Content
Sorry I meant h2.
The H1 is giving me problems but I will try what you said and hopefully sort it.
I have got the old vm box down to check the incoming cable tomorrow and go from there.
cheers for the help
post back if it work
where did ya get the h2 from? is it black ?
-
Member
- Rep Power
- 0
Another typo!!!
What am I like.
2s i meant, double typo.
Tried again and even got the old vm box out and that scans fine so looks like a faulty cable tuner so going to return it and try a replacement.
cheers again
Last edited by mgzr1400; 21-03-2015 at 12:05 AM.
-
Hidden Content Originally Posted by
mgzr1400
Hidden Content
What am I like.
2s i meant, double typo.
Tried again and even got the old vm box out and that scans fine so looks like a faulty cable tuner so going to return it and try a replacement.
cheers again
the box you got is ZGEMMA-STAR 2S Twin S2 Satellite Receiver Twin Tuner Dvb-s2 only !
and not cable.
this is the one you need for cable one you need Zgemma Star H1 Twin tuner digital satellite + cable receiver .(( tuner 1 for digital satellite + and tuner 2 for cable receiver .)
i hope it helps
-
Post Thanks - 0 Thanks, 1 Likes
-
Member
- Rep Power
- 0
Hidden Content Originally Posted by
ilovenzb
Hidden Content
the box you got is ZGEMMA-STAR 2S Twin S2 Satellite Receiver Twin Tuner Dvb-s2 only !
and not cable.
this is the one you need for cable one you need Zgemma Star H1 Twin tuner digital satellite + cable receiver .(( tuner 1 for digital satellite + and tuner 2 for cable receiver .)
i hope it helps
Sorry for the confusion mate, i have both. the 2s is working sweet but just sent the h1 back, looks like a dodgy cable tuner.
I will let you know how I go on with the replacement.
cheers again for the help.
Just wondered if you have had any problems with the picons disappearing ?
-
ok m8
i got zgemma star h1 good box only had about 4weeks now / some time there no sound on my box got turn it off at the wall for 3min then back on :S
then it works
-
Post Thanks - 1 Thanks, 1 Likes
-
Member
- Rep Power
- 0
All sorted now! Got a replacement box and all sweet, struggling to get free to air hd channels to show up in section but apart from that, looks great.
-
Post Thanks - 0 Thanks, 1 Likes
-
Hidden Content Originally Posted by
ilovenzb
Hidden Content
ok m8
i got zgemma star h1 good box only had about 4weeks now / some time there no sound on my box got turn it off at the wall for 3min then back on :S
then it works
i fix this it was the hdmi cable
buy a new hdmi cable it b all good now about 4 months all good Hidden Content
-
Hidden Content Originally Posted by
mgzr1400
Hidden Content
All sorted now! Got a replacement box and all sweet, struggling to get free to air hd channels to show up in section but apart from that, looks great.
struggling to get free to air hd channels to show up in section on cable side ? or sly
-
Post Thanks - 3 Thanks, 0 Likes
Bookmarks