-
Member
- Rep Power
- 0
downgrade any vmdg480 here
uploaded the settings.cfg to 192 page put Image1.bin in your tftp server make sure
your Internet Protocol Version 4 is set to 192.168.100.10 open telnet and copy and
paste all the commands together into telnet and hit enter it will load the firmware
from the tftp server when done just leave it for 30 sec then reboot if it does not
work change this line in the commands (set v2FwControlImageNumber.0 i 1) then try
again!! these commands can be used to update or downgrade any VMDG480 rev enjoy !!
-
Post Thanks - 1 Thanks, 0 Likes
-
Junior Member
- Rep Power
- 0
Re: downgrade any vmdg480 here
What is the telnet password? I am trying to login and it asks for username and password
i tried all
admin : changeme
admin : password
superuser : 1234
MSO : changeme
Thanks
-
Member
- Rep Power
- 0
password/username incorect
ive done the same every time i telnet and enter username/pass it says incorect password/username
any help will be apreciated
thanks
twistem69
Bookmarks