ok as some of you know i have a new conservatory i have been having problems with the rad in there not getting hot.
I have bled it many times and it was only getting warm.Today after a chat with nao i decided to have another go this is what i done.
Firstly i shut the pump off,then bled every rad in the house no air was found,so next i swithed on the pump to max shut down every rad except the one in the conservatory,after some 5 mins i bled that rad again no air so i stopped doing that sat down and thought better turn up the room stat once i had done that after a few mins the rad was getting nice and hot so hopefully the job is done.Only time will tell Hidden Content
Added
Now all rads are back on and all seems fine will need to check pump speed after 24hrs see if i can lower it to No2
Bookmarks