Thanks Thanks:  0
Likes Likes:  0
Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Jun 2006
    Age
    56
    Posts
    17
    Post Thanks
    Chats
    0
    Rep Power
    0

    pace 400 netid help

    hi

    im trying to change the netid for a friend using the funcard the person lives in elephant and castle se london and the area i think is excw the old netid was 41047 the new one is 41069. this box is chipped using an original ntl card the keybox and id are written on the box. so i did a external exp using the key and id and used netid 1.7 to write the internal exp. and used netid_hex_v1.8_funcard but after i pull redjumper out and reboot put card in connect the feed cable but the box does not reboot i used a different flash 3.7 but nothing. i managed to change the netid in my pace 400 a month ago using the same method with no problem im in a excw area. please any help. i think that the person who chipped the box wrote the wrong boxkey what is the best mathod to read the original ntl card.

    thanks

  2. #2
    Respected DessertDog's Avatar
    Join Date
    May 2006
    Age
    73
    Posts
    4,798
    Post Thanks
    Chats
    0
    Rep Power
    47

    Re: pace 400 netid help

    Surely that area is Nag3 by now?
    PLEASE, support this charity Help for Heroes
    If this post has helped you please hit the thanks button below ty

  3. #3
    Member
    Join Date
    Jun 2006
    Age
    56
    Posts
    17
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: pace 400 netid help

    no yet but the problem is that when i put the card in to change netid the box wont reboot and if i go to card status it says backlisted if i use netid 1.8 problably vergin blacllisted the netid 1.8 flash. also i tried to read the original card with cas3 it wont rercognise it and negra also wont read from it maybe the card is locked

  4. #4
    veteran thesparky's Avatar
    Join Date
    Jun 2006
    Location
    London, United Kingdom, United Kingdom
    Age
    55
    Posts
    1,229
    Post Thanks
    Chats
    0
    Rep Power
    19

    Re: pace 400 netid help

    use netid 2.1.7.1


    Step 1: Enter in your Network ID in either selecting from the list, entering it in Hex form at the bottom or decimal value in the dedicated box.

    Step 2: Enter in your chosen Pin Number in "pin box" select either set network id and pin ect ect then save as IntEEprom.hex.

    Step 3: Enter in your box key and IRD in the boxes make sure ird is forwards. then save as Exeeprom.hex

    Step 4: click the flash button to unload the flash hex, save this as flash.hex. then programme to your card using your chosen software.
    D I S C L A I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  5. #5
    Member
    Join Date
    Jun 2006
    Age
    56
    Posts
    17
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: pace 400 netid help

    hi
    thanks where can i find the netid 2.1.7.1
    looked on the forum but cant find
    thanks

  6. #6
    veteran thesparky's Avatar
    Join Date
    Jun 2006
    Location
    London, United Kingdom, United Kingdom
    Age
    55
    Posts
    1,229
    Post Thanks
    Chats
    0
    Rep Power
    19

    Re: pace 400 netid help

    Hidden Content Originally Posted by mariop1 Hidden Content
    hi
    thanks where can i find the netid 2.1.7.1
    looked on the forum but cant find
    thanks
    sorry about that typo 2.1.7.2

    here it is anyway
    Hidden Content
    D I S C L A I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader.
    I am not responsible for what you do with it!

  7. #7
    Member
    Join Date
    Jun 2006
    Age
    56
    Posts
    17
    Post Thanks
    Chats
    0
    Rep Power
    0

    Re: pace 400 netid help

    thanks

Similar Threads

  1. How to change netid on telewest pace 4000
    By sadi in forum Cable TV funcards
    Replies: 3
    Last Post: 16-03-2009, 12:31 PM
  2. pace 4k netid
    By MushkaUK in forum Cable Talk section..
    Replies: 2
    Last Post: 25-10-2008, 07:48 PM
  3. Pace 2000 netid config file
    By s0000 in forum General Cable T.V
    Replies: 1
    Last Post: 28-04-2008, 04:43 PM
  4. Pace 4001n Netid change with atmega?
    By stevedurban in forum Cable TV funcards
    Replies: 1
    Last Post: 09-10-2007, 09:18 PM
  5. pace 1000 displays pace all the time
    By vincewrd in forum Cable Talk section..
    Replies: 3
    Last Post: 27-02-2007, 12:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •