Hi I've just sett up a bm7000s all working great apart from I get a cam initializing message on the screen constantly any help would be great
Type: Posts; User: squidge; Keyword(s):
Hi I've just sett up a bm7000s all working great apart from I get a cam initializing message on the screen constantly any help would be great
sorry to correct u guys but acording to the 17th edd regs part 7 special locations, there are two zones the first is basically the bath and the second 0.6m radius around it each at 2.25m high....
right 18 lamps at 50 watts comes out at about 3.75 amps thats fk all then take the rest of the lights in the circuit into the equation and u probably will still be able to run them on 1mm i would use...
sussed it no cable feed
am having probs with my sb4200e it wont lock on ive tried loads of different fwares and a couple of macs im in an ex c+w area any help would be appreciated thanks
streaming is ok its transcoding the file thats crap i use transcode 360 as above ive tried em all and thats what ive had best results with
if it had naitive dvx xvid mkv support it would be cool id...
you cant just drop a drive in with firmware pre installed lol
read up on spoofing mate and yer as above try a reflash with a diff f.ware oh yer and what actually did u do wrong
and try FW# on...
why get a chip just flash the drive n play youre backups
if u use on live u use at your own risk as with anything of this type
u need to know how to flash a drive as u should allways have the...
have dual boot system my self
installed xp first
then used partition magic to create a linux partition
then installed fedora 7 which auotomatically configures your'e bootloader once done u will...
hi everyone got there in the end my scan conf was corupt ignore nonsens about http settings just needed reboot at mains LOL (more bothered about getting it working than thinking about what im doing)...
hi guys got the slx signal booster from argos that was recomended on another thread and channels work fine has adjustable gain so can see it was def that and put a spliter in so have net and dbox at...
got my box working i played around with the settings and disabled http server and scan worked fine first time could this be a memory issue cos it seems odd and also some channels keep stuttering...
this is my scan conf after following renwitches advice looks ok to me but am newbie thanks also have tried scanning with fast scan on and off cheers
TP_freq=******
TP_pol=0
TP_rate=6***...
thanks for getiing back to me as have been pulling my hair out will have another look thankyou
am worried tuner is nackered
but am a newbie and liable to flap think i have signal
ber 104758
snr 43947
sig 39835
but is same with or without cable in????
thanks guys helpis apreciated...
running commando 3 put in youre scan conf and put in net id details in commando still no transponder gutted cheers for the help though
thanks mate will do ps is it ok to go into scan conf with flash ftp and edit/save cheers as i havnt got a decent guide for the setup cheers
changed to this with flashfxp still no joy sigh u ever get that sinking feeling
TP_fec=3
TP_freq=666750
TP_pol=0
TP_rate=6952
TP_scan=0
bouquetMode=0
delivery_system=0
diseqcMode=0
these are the settings in the scan conf i used
TP_fec=3
TP_freq=******
TP_pol=0
TP_rate=****
TP_scan=0
bouquetMode=0
delivery_system=0
nt* tried scanning with both 6887 and 6952 thankyou
hi would apreciate any help with this i have just got a nokia dbox with commando v3 installed on it and when i try to scan all i get is transponder scan failed if anyone could point me in the right...
hope everyone is ok