That US stream is very difficult to find.
It is sometimes in live youtube streams but not always.
You could try Mobdro its excellent. A different program..easy to load..plenty of youtube guides
Type: Posts; User: Stantheman; Keyword(s):
That US stream is very difficult to find.
It is sometimes in live youtube streams but not always.
You could try Mobdro its excellent. A different program..easy to load..plenty of youtube guides
hi mate
if you press the tv guide button.it will start at all chanells.then use arrow up on centre navigation triangles.use the left or right navigation keys until you come to settings.
there are 3...
hi
the spi chip has haxoware already on it.
the majority of 256 modems do have pin headers.but i have never used them
stantheman
HI
I have unloopes some in just over 25 seconds.
I have a t911 unlooper
stantheman
Hi M8
Follow john 0745 advice and collider,s!
Use cheap hot air blower( I got mine from local Market ?5.00)
make sure you Have a good Soldering Iron 30 watt with a Fine Tip.
Get a Fluxpen from...
hi m8
why noy cut the legs off the correct chip,bearing in mind the correct
orientation of ic ,i.e pin1 or 8 will have a small dot on it.
leave as much of leg as is possible.then solder...
Hi
If i were u i would replace ic,its only got 8 legs?
can find 1 pic of atmel ,if your a good solderer,go for it.
should be a doddle
stantheman
Hi M8
I can flash your 256,just done 12 today
if you want further help pm me
all the best
stantheman
Hi
Have you checked if you have incoming signal,have you been disconnected on node?
stantheman
Hi
Yeh all my kit is set up correctly,it was reading card fine in Nagra
as Rev BOD,should have paid more attention to Winexplorer Screen.
My Mistake,1 good 2110c down the pan!!
Thanks fellas for...
Hi
I have Thompson Freeview Box 160 gb HD with Top up Tv Card.
How Do i enter these codes manually pls?
any Help Greatly Appreciated
Stantheman
hi
thanks fellas, but i thought it was a gonna.
stanthemn
Hi All
Its nice to see W O D back.
I was in the middle of glitching rom11 Rev BOD
And in sure winexplorer said it had popped!
So i disconnected my serial coonection & put it on my infinity...
I agree
Its strange how it went back to a more normal speed
personally i dont use it anymore
i use original config file that came with mac.
but u may be right its a sprat to catch a mackerel!!...
HI M8
If your trying to flash a n sb5101e use haxoware
i have used it and it works fine.all lights etc.just pm me if you want it
stantheman
Hi M8
Can you tell me what the modem was flashed with originally!]i,e.Infinite or stealth or Sigma etc?
Maye on of us can help you further if we have this info!
stantheman
Hi
Have u tried a different mac address,also what have you flashed it with?
stantheman
Hi All
I need some advice on an ambit 255.
I can only get to virgin registation page.I know that the ambits
have taken the new bootloader update version 2.16 i beleive.
But im using ambit cofig...
Hi
Im using a motorola Sb5100i
And beleive it or not ,im exceedining 50 meg lots of times
but 40 meg ,im well chuffed with.
As i said maybe virgin are rolling out slowly,and im not a million...
Hi
I have checked speed again at
mybroadbandspeed.co.uk
clocked 37.89.meg
here is link
Hidden Content also tested at broadband-expert.co.uk
Broadband...
hi m8
im somewhere near swansea,i noticed the change in speed yesterday.And its not capped!
Im getting 70 meg ,and bending the needle on speedtest.net!
FINGERS CROSSED IT STAYS THAT WAY!...
Hi Mate
i would go for motorola,s anyday sb5100.sb4100.
The tut i can send if you want to pm me
Have a good read of Haynes cable modem guide by cableguy.
Or buy one pre -flashed with sigma x 2...
have u tried your sisters config?
stantheman
Hi
read your post,and i et same prob on my sb51001.
I USE PORT 8080.AND UNCHECK UNP PORT MAPPING,BUT MAX CONNECTION RARELY EXCEEDS 1.5 MEG.SO ANSWERS ON A POSTCARD PLEASE!!
stantheman
Hi
Just a thought but have you tried to force a different config file?
Stantheman
Hi All
Im using business config,think its slowly being rolled out nationwide On speedtest im getting 60 meg + but on average
a stunning 40 meg,it i have tried it at various times of day
an...
HI all
I despeately need the files listed below
IF YOU LOOK AT MY POST COUNT,A LIYYLE HELP WOULD BE APPRECIATED
AS I HAVE HELPED OTHERS ON THE FORUM AND VICE-VERSA!!
AFTER ALL THATS WHAT THIS...
Thanks Seamus
i need rom11 unlocker
and latest working mosc image Pure2100
thanks anyway
stantheman
HI All
My pc crashed and i lost all my cable files!!
Would 1 of you kind folk pls pm me some files i need urgently!
Copy of winexplorer ( Not latest one!)
rom11 unlocker
Nagra edit all...
HI
thanks for replying
i have a collection of macs from about 10 miles away
so it should be on different ubr.
I need a copy of smac my home pc nic card no longer works
im hoping smac can sort it...
Can someone pls tell me.do i have to sniff for mac addys
thro virgin modem,or can i use bt landline and sniff
from there straight pc to bt modem,router?
Also
if i take my own ambit 250 and sniff...
hi
thanks for that,im goin further afield to scan for mac addreses
thanks
stantheman
Hello
im goin crazy trying to get this model up & running
I have tried a dozen macs from an area ouside my ubr
about 4 miles away.
I have entered the macs on the sigam page(pre-flashed from...
HI
thanks for replying>
I dont know what flash to put on it!!
also do h have to load a bootloader on it?
thanks
stantheman
HI
I need help urgently on flashing this modem
Motorola sb 4200
I have followed tuts, but i keep getting
unable to verify error ,essage about 60% thro the flash procedure
I am trying to flash...
hi
no its a 5100i
im trying to flash with sigmav2
i have wrote boolader
now in flasing with
sigma x 2 but its taking ages
thanks
stantheman
Hi
i have foolew the tuts here regarding flashing sais modem
i have flashed overnite
!! and noe o have no lights on the front only briefly
for a rew seconds and then the modem lights all go...
hi
which vesion of flash would you use maybe thats why there is a conflict?
thanks
stantheman
HI
previous to my earlier posts
i have had some success flashing a motorola with blackat lead
,i have flashed motorola with sigmax2 flash
it takes about 1 hour.i have confirmed
that the flash...
hi
thanks for all the help so far
But i cant see a pic of hoe to connect blackcat lead,i have a poper 1i have soldered the header on but dont know how to connect lead??
thanks again
stantheman