Hi blahblah,
Did you write the card with distance then? as many stop using that program along time back & the rst method was the way to go.....LoL well was for me anyway.
Type: Posts; User: Satch; Keyword(s):
Hi blahblah,
Did you write the card with distance then? as many stop using that program along time back & the rst method was the way to go.....LoL well was for me anyway.
Hi All,
Leicester area 00012 now switching to N3 Asian, Films and other channels now gone.
Received card on the 08/04/2010 so if you get your new card you have about 2 weeks left.
Hi All,
Try Here Jiroma think this is what your after.
Hi All,
I would try as john0745 as said reflow the ST chip U5600 as you don't have much to loose these days.
Hi All,
TW begin with 2C I do believe then any number from 0 to 9 & letters A to F, So it could be 2C 1A 2B 9C etc
Out of curiosity how are you writing the files as mute error could be wrong...
Hi Ish,
Are you sure it's the card at fault M8? as alot of areas around you have had new cards and are now in the process of moving to N3 only FTA left so I'm lead to believe (could be wrong...
Hi All,
@ fish007 did you change the setting in xncs as john0745 said all ticked but ghost must be in eeprom, if so what happened?
Is this card locked or not as I thought it was open after reading...
Hi All,
Hey Chimaera check out mickyrobbo thread Here you may get a cheap 500c....LoL well you never know
Hi All,
fish007 what have you tried since the last posts & what stage are you @ do you have the BK?
Hi All,
Aren't Rom11 B0Cs a locked card if so will need glitching, although I suppose could be a trader locked one?
Edit
Sorry I didn't read the thread properly I missed
Hi,
I have no idea M8 I'm Sorry to say I used to put some numbers/letters on there to help but has you say it's now gone :-(
Oh why we are on about key mate anyone know how to program the pic...
HiYa Gaz,
Sent you an Email M8 see what you think I made that one out of Card board sockets resistors & wire.
But the Atmel deffo needs programming I'm afraid to say.
Hi Gaz,
It will not log M8 as the chip is not programmed :trustme: you would need a programmer that does the fitted atmel (But you know this) LoL
Hi All,
@gaz I only pointed you in the direction of the software posted by thesparky so Thanx go to thesparky & the creators of this software
Here you go gaz Try Here saves ya looking.
The old logger was from TMC he doesn't seem to do them any more not that I can find anyway.
I also have noticed that on the jabs logger the parallel...
Hi,
Out of curiosity are you using a different camid on the second card than the first, also is TB cut?
HiYa,
Did you get into this card preetstud69?
If not try this as your BD0 But First I'd like to say Thanx to who ever sorted this out (I don't know there name Sorry I just read loads of posts all...
Hi All,
A word of warning is needed here as you can pair a card even if locked so would show as paired in the EM, this is the bit that counts also remember people lie to get rid of there...
Hi All,
shaan is that the image you have to unlock in nagraedit with DD DD & so on?
If so if I remember correctly it reads as failed first time but read O K the next time, but that is if it's...
HiYa bamesal,
That's Great news that your getting there I'm glad I could help a little M8, what card are you trying to do and are you sure stb details are correct?
Hi,
You either need to reset the stb fully? can't remember the key presses for this (Might be on my other comp will check later)or you could try to change your sym rate that might help?
Change your...
HiYa,
What's the sym rate, freq + etc in the EM it's been a while since I played.
HiYa,
Looks good to me But hey I can only use ON/Off Buttons....LOL
HiYa,
Have you checked the frequency sym rate and netid in the EM set the frequency anyway not forgetting to save it (Although it should sort it's self out) but not always Hey.
Did the box update...
Hi All,
I suppose you are all on the latest Virgin software by now so if you click on Tv Guide then 8 = settings then should be 4 = Change Display & Audio Settings.
If that's no good I'm at a...
HiYa,
Grab Ya remote, Click Settings then Change Display & Audio Settings then you should see the next step...LoL
Hi,
Don't know if you have sorted this yet?
But try this M8y although this stb should set it's own Netid in a pure area so there maybe other issues with it...
HiYa,
Well if Melton is pure the box should update it's self or you could use the funcard method to set the net id?
EM to sort Freq & Sym rate.
Good Luck
Hi,
Is your feed live and connected to the stb..LoL well had to ask.
What you tried so far? is net id + set what area and all that.
Check Here see if your area is having Probs
HiYa,
@hippy dave although you have cut TB the card can still be hit updated or killed so I would advise not using the card!!! If it gets hit no BK.
65535 usually means your Inteep is corrupt or deleted try writing the Inteep again.
I always advise
1 = Exteep
2 = Flash
3 = Inteep
HiYa,
Did you get the BK? If so then it did work surely...
What card are you trying to do?
Here's some more bytes but as said B4 not used in a long Time
[NTL]
IRD =0x20020004
HiYa,
These where the last bytes I used?
[NTL]
IRD =0x20020004
BOXKEY =0x00f69af8
But not used them for a while Pure Leicester
HiYa,
How do you Jtag a Sammy 2110?
Sorry Hitman don't know what your problem is? Weird but if you want me to have ago PM me?
HiYa,
As I'm Pure Nthell can't say 100% it does!!! But Have read else where that the 2110 does work in TW-land So go for it M8
Good Luck
HiYa,
Just Posted in the Mosc Section Here
HiYa,
You don't need Mac_Mot on the 98 system M8, why sdt is reporting it missing I really dont know as not had that problem.
Good Luck
HiYa,
Are you sorted Now Jango?
Let one of my Sammie's update to 3.5 so I could have a Play (Bad Move NO pin box and only three Cough Cough Cough Adult Channels) PMSL and peeps ask why do you...
Hi,
I would remove your numbers M8, not a good idea to post Um in the Open Forum.
PM sent
Hi,
Yeah you can try and read your BK with sdt.
OCD! To be honest not really used it enough to help but I did play with it a year or more ago
Here's a pic for ya to look at, see what you...