PDA

View Full Version : Fitting radiator



pops1
07-01-2008, 09:44 PM
Can anyone give me advice on how to fit a radiator. All the pipes are already there and the rest of the house has heaters, but the one in front room is missing. I've bought a double 2Mitre radiator, but I'm not confident as to the best way to fit it.

rom10
07-01-2008, 10:23 PM
lock off all other rads but the rad you want to change the stop cock out side ,not main water suply.
once you have bled it down replace with new one any probs will give my number

pops1
07-01-2008, 10:37 PM
Thanks for that. Any ideas about how to fix the radiator onto the wall and connecting it to the pipes.

rom10
07-01-2008, 10:40 PM
Thanks for that. Any ideas about how to fix the radiator onto the wall and connecting it to the pipes.
where are you and not your address .
and if you are good will give you phone number to talk you through it

cant give number only 6 or 7 posts but will give it to you some how


what area you from if i am close will show you

cant pm you yet but you pm me

pops1 what area you in

pops1
08-01-2008, 02:11 PM
Bradford West Yorkshire

rom10
08-01-2008, 07:23 PM
Bradford West Yorkshire
the only way is to give you my number when i reach 20 posts then i will talk you through ,i am in glasgow a bit to far to walk eh.
if you want the help i am willing to help

pops1
08-01-2008, 07:39 PM
I really appreciate your willingness to help. If I get really stuck I'll let you know.

rom10
08-01-2008, 08:01 PM
i have sent pm let me know if you get it pls

redglug
08-01-2008, 08:22 PM
You can get a bracket kit and all your pipe connectort from B&Q or Wicks

rom10
08-01-2008, 08:28 PM
You can get a bracket kit and all your pipe connectort from B&Q or Wicks
why pay over the odds for fits when you can get trade lots of bq fit ie 90 45 only fit bq pipes .
if you like paying full prise ,i dont